Industry News

The new hook should be subjected to a load test, and the opening of the measuring hook should not exceed 0.25% of the original opening.

The hook used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.

Now many manufacturers have purchased soft tiedown products. But the correct way to connect the hook with the soft tiedown may be a headache for many manufacturers. Let's talk about it below.

The soft tiedown is first checked to see if it has a certificate of conformity. Each hoisting belt has been strictly inspected before leaving the factory and has a certificate of conformity

The shackle should be smooth and flat, and no defects such as cracks, sharp edges, overburning, etc. are allowed.